Mr. COLOR solvent-based acrylic paint has long been highly regarded by modellers worldwide. Mr COLOR delivers an outstanding finish with a wide range of colours available.

Suitable for both brush and airbrush.

Recommended thinners for the Mr. COLOUR range:

• Mr. COLOR THINNER is the basic standard thinner for Mr. COLOR. Thinning ratio 1 : 0.8~1.0
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to dilute Mr. COLOR for airbrush use. Thinning ratio 1: 1~2
• Mr. RAPID THINNER: Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

Mr. COLOR paints can be mixed with: Mr. COLOUR, Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX, Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC and LASCIVUS.

DO NOT apply Mr. COLOUR over a base coat of AQUEOUS HOBBY COLOUR and ACRYSION, but it can be done the other way around.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats when painting with a paint brush, or 2 to 3 coats for airbrushing. Let dry between coats for a few hours before applying more.

TIPS

Use T114 Mr. Paint Remover to remove paint from a surface.

Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.

Mix approximately 5 to 10 % C30 Flat Base to change gloss colours to a semi-gloss finish, or 10 to 20 % for a matt finish.

Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.

ATTENTION:

Store in a cool and ventilated place, away from direct sunlight.

Use in a well-ventilated area.

Made in Japan.