Get the full AMMO Acrylic Water products range together. (6 Jars 250 mL).
53,70 € 52,50 €AMIG2000
High quality thinner for acrylic paints.Jar of 60 ml
4,75 €AMIG2019
White Spirit thiner designed for modelling. Jar of 100 mL.
5,95 €AMIG8003
70-80 units to make the most effective and easiest mixing.
3,25 €AMIG2011
Odorless fluid to create Heavy Chipping Effects.Jar of 35 mL
3,75 €AMIG2025
Quick glue for polystyrene plastic.Jar of 30 mL.
4,25 €The Atlas Cheetah is a South African fighter aircraft designed and produced by the aviation company Atlas Aircraft Corporation (later Denel Aeronautics). It was developed at the behest of, and principally operated by, the South African Air Force (SAAF).
The Cheetah was developed amid the Border War of the 1980s as a major upgrade of the French-built Dassault Mirage III fleet operated by the SAAF. The programme integrated technology from the Israeli-built IAI Kfir, which had been derived from the Mirage 5/IAI Nesher. The upgrade programme, which was known as Project Cushion, produced three variants; the two-seat Cheetah D, the single-seat Cheetah E, and the single-seat Cheetah C. All three models were inducted into the SAAF, functioning for a time as the service's most capable fighter and strike aircraft. A single Cheetah R, intended for aerial reconnaissance, was built as a prototype, but this variant never entered service.
The Cheetah D was the sole two-seater variant, and was predominantly used as a trainer for pilots converting to the Cheetah C. It also had a secondary attack capability, including the ability to deliver PGMs. Under Project Recipient, 10 Cheetah Ds were re-engined with the Atar 09K50C-11, replacing their original Atar 09C engines. After the engine modification, the remaining aircraft received an avionics upgrade to bring them to the same standard as the Cheetah C. The original three piece front windshield was also replaced with a one-piece wraparound version.
No customer comments for the moment.
AMMOF542
High quality acrylic paints designed for accurately painting your miniatures.17mL jar.
2,45 €
Add to cartBD0068-0.5
Cemented Carbide Engraver blade for handle BD0058-D. Size 0.5mm
10,95 €
Add to cartBD0068-0.8
Cemented Carbide Engraver blade for handle BD0058-D. Size 0.8mm
10,95 €
Add to cartBD0068-1
Cemented Carbide Engraver blade for handle BD0058-D. Size 1mm
10,95 €
Add to cartBD0072-2
Curved Tip Angled Model Tweezers
8,75 €
Add to cartLIANG-0010
Tire Tracks Effects Airbrush Stencils A Scale: 1/32 1/35 1/48
15,95 €
Add to cartLIANG-0011
Tire Tracks Effects Airbrush Stencils B Scale: 1/32 1/35 1/48
15,95 €
Add to cartLIANG-0142
Paper Leaves Series - Spring 2 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0145
Paper Leaves Series - Autumn 3 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0146
Paper Leaves Series - Autumn 4 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0147
Paper Leaves Series - Winter 1 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0150
Paper Leaves Series - Summer 2 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0403
3D-print Model Shoeprint Tools China
14,25 €
Add to cartLIANG-0426
3D-Print Crystal for Diorama X 20. Scales 1/35 1/48 1/72
12,95 €
Add to cartLIANG-0427
3D-Print Crystal for Diorama X 32. Scales 1/35 1/48 1/72
12,95 €
Add to cartLIANG-0428
3D-Print Crystal for Diorama X 32. Scales 1/35 1/48 1/72
12,95 €
Add to cartAMIG4510
WARNING. This issue is only in ENGLISH language.
8,00 €
Add to cartGuía de 160 páginas. Segundo volumen de un total de 5. Versión castellano
32,00 €
Add to cartAMIG8203
30 mL lacquer metallic paint ONLY EUROPEAN UNION
5,40 €
Add to cart1/48 Szu 35S Flanker E (for GWH kit)
13,55 €1/32 F/A-18D Late Hornet (for...
29,90 €1/35 T-34/85 Model 1944 Factory No.183
42,25 €