AMIG2000
High quality thinner for acrylic paints.Jar of 60 ml
4,75 €AMIG2019
White Spirit thiner designed for modelling. Jar of 100 mL.
5,95 €AMIG8003
70-80 units to make the most effective and easiest mixing.
3,25 €AMIG2025
Quick glue for polystyrene plastic.Jar of 30 mL.
4,25 €AMIG2011
Odorless fluid to create Heavy Chipping Effects.Jar of 35 mL
3,75 €AMMO is pleased to present its new model: PANZER I BREDA in 1:35 scale in Limited Edition.
History:
In October of 1936, the first Panzer I Ausf.A would arrive in Seville, to be sent to Cáceres where they would be used for training their crews personnel. A month later, the Ausf.B. would follow the same path, and together form the first three companies. Although they had not participated in any combat, the Ausf.A were well worn as they had been used for both training and field manoeuvres for several years.
The instructors knew of the essential defect: the bulkhead separating the engine compartment from the crew compartment was not armoured. This implied that a shot penetrating through the air vents could cause injury to personnel. For this reason, additional protections were fabricated including armoured plate for the air inlet. In Germany it would take longer to find a solution to this problem, it was not until the end of 1938 that similar protective measures were designed and implemented and could be seen on the last twenty vehicles to be delivered in January of 1939.
Its first participated in the Spanish Civil War took place during the attacks on Madrid where they were deployed to support of the national infantry. This engagement made it clear that the design lacked the power, crew protection, and firepower to the fight against the infantry. Their adversaries lacked anti-tank weapons which contributed to some initial success but as time passed it became clear that the tank was vulnerable to the T-26. Despite German opposition, the solution was to install the Italian machine gun Breda 20mm in the same turret in a configuration similar to the Panzer II. Testing was carried out on four vehicles removed from the front, where the turrets would be modified to accommodate the fierce weapon.
These newly reconfigured turrets were repainted, possibly with the same paint used for touch-ups. It is rumoured that a lack of non-essential supplies forced the use of domestic products of the same colour. The difference in tone is perhaps due to both this circumstance and the accumulated wear on the previous paint, with several years of service and at least one which served on the front line. The units transferred from Seville likely arrived in October of 1937, when the so-called First Battalion of battle tanks was formed to consist of two Groups: the first with three companies, and the second with only two. On the basis of the written and graphic documentation compiled, we consider the hypothesis that the second company did not receive any of these tanks, which can be corroborated by a photo dated mid-October 1937 which was taken in Zaragoza, and shows ten Pz.I and five T26 in formation.
Unfortunately, very few graphic documents survive and are limited to about thirty low quality photos which have been cut and censored to remove date or location. Fortunately, from December 1938 onwards, a three-digit identification system was introduced which allows the only surviving vehicle up to that date to be identified. With its camouflage and the damage suffered in combat, this example is a tank belonging to the 3rd Company.
Model details:
Panzer I Breda - Painting and Marking Guides Download
No customer comments for the moment.
AMMOF542
High quality acrylic paints designed for accurately painting your miniatures.17mL jar.
2,45 €
Add to cartBD0068-0.5
Cemented Carbide Engraver blade for handle BD0058-D. Size 0.5mm
10,95 €
Add to cartBD0068-0.8
Cemented Carbide Engraver blade for handle BD0058-D. Size 0.8mm
10,95 €
Add to cartBD0068-1
Cemented Carbide Engraver blade for handle BD0058-D. Size 1mm
10,95 €
Add to cartLIANG-0010
Tire Tracks Effects Airbrush Stencils A Scale: 1/32 1/35 1/48
15,95 €
Add to cartLIANG-0011
Tire Tracks Effects Airbrush Stencils B Scale: 1/32 1/35 1/48
15,95 €
Add to cartLIANG-0142
Paper Leaves Series - Spring 2 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0145
Paper Leaves Series - Autumn 3 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0146
Paper Leaves Series - Autumn 4 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0147
Paper Leaves Series - Winter 1 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0150
Paper Leaves Series - Summer 2 Scale: 1/32 1/35 1/48
8,75 €
Add to cartLIANG-0403
3D-print Model Shoeprint Tools China
14,25 €
Add to cartLIANG-0426
3D-Print Crystal for Diorama X 20. Scales 1/35 1/48 1/72
12,95 €
Add to cartLIANG-0427
3D-Print Crystal for Diorama X 32. Scales 1/35 1/48 1/72
12,95 €
Add to cartLIANG-0428
3D-Print Crystal for Diorama X 32. Scales 1/35 1/48 1/72
12,95 €
Add to cartAMIG4510
WARNING. This issue is only in ENGLISH language.
8,00 €
Add to cartGuía de 160 páginas. Segundo volumen de un total de 5. Versión castellano
32,00 €
Add to cartAMIG8203
30 mL lacquer metallic paint ONLY EUROPEAN UNION
5,40 €
Add to cartMODERN GAS PUMPS Limited Edition
11,50 €