

Get the full Cobra Motor Paint range as one set (30 ml bottles: 62 x Acrylic Colors, 1 x Acrylic Thinner, 1 x 2K Clear Lacquer, 1 x Hardener for 2K Clear Lacquer, and 1 x Clean & Thinner for 2K Clear Lacquer).
Security & Privacy Policy
Delivery Policy
Return Policy
Transform Your Models with Cobra Motor Paints – The Ultimate Collection
Fuel your passion and elevate your model-building game with the complete range of Cobra Motor paints! Whether you're detailing car exteriors, bike frames, intricate interiors, engines, wheels, tires, lights, exhausts, or any other component of your favorite vehicles, Cobra Motor has everything you need.
Formulated with an acrylic base yet delivering lacquer-like performance when airbrushed, these paints offer exceptional durability, coverage, and flow. Their self-leveling properties ensure a smooth, flawless finish every time—whether you're using a brush or airbrush. Say goodbye to frustration and hello to effortless perfection!
What makes Cobra Motor stand out? Unlike other model paints, Cobra Motor colors are completely non-toxic, letting you enjoy your hobby with greater peace of mind. Plus, thanks to its exceptional yield—each bottle can cover up to four or more models—you’ll benefit from remarkable value and durability.
Enhance your hobby and bring your models to life with the complete Cobra Motor paint collection. Every color, every detail, every masterpiece—just a brushstroke away. Ready to make your mark? The road to performance and perfection begins here.
Application tips for Cobra Motor paints:
- Dilute Cobra Motor paints in the proportion you prefer, normally between 30% and 60%, with its thinner A.MIG-2260 Cobra Motor Thinner & Cleaner or with A.MIG-2000 Acrylic Thinner. To apply using a brush, you can apply them undiluted or diluted with a little water.
- Hold the model with a support on the inside, so that you never touch the surface with your fingers, as this can create orange peel or imperfections in the lacquer. Use gloves that are completely clean of talcum powder and dirt.
Application tips for 2K Cobra Motor Lacquer:
- To achieve the gloss of real car bodies, use 2K Cobra Motor Lacquer. It is a two-component epoxy lacquer, a special airbrush version of the polishing lacquers used on real cars, so it is applied in the same way and creates the same gloss as real cars. Mix 2 parts of lacquer with 1 part of Hardener, if you want to apply more fluid coats you can add the desired amount of 2K Lacquer Thinner and Cleaner.
- Clean the surface to be painted and remove any dust before applying the lacquer. You can spray a little water with the airbrush to remove dust particles suspended in the air.
- Hold the model with a support on the inside, so that you never touch the surface to be painted with your fingers, as this can create orange peel or imperfections in the lacquer. Use gloves that are completely free of talcum powder and dirt.
- Unlike the Cobra Motor paints, the lacquer is toxic. Use a mask and proper ventilation.
- Spray a thin coat of lacquer first, let it dry for 2 minutes and then apply the thicker coat at low pressure, approximately 1 bar-14 psi, to leave a completely wet coat, but do not flood the surface or it will sag and create runs.
- Try to apply the lacquer coat in one continuous pass, starting on one side of the model and finishing on the other.
- Clean the airbrush with 2K Lacquer Thinner and Cleaner.
- Allow it to dry for 24-48 hours under a clean cover to prevent dust from settling on it.
- If any dust particles have fallen into the lacquer, or if it has been scratched during handling, it can be polished in exactly the same way as a real car. We recommend Mr. Hobby's Mr. Compound Coarse, Fine and Superfine polishes.
Contents of the set: